As an Amazon Associate, we earn from qualifying purchases. Some links on this site are affiliate links at no extra cost to you. Our recommendations are based on thorough research and editorial judgment.
10 Best Soldering Tool Storage Solutions to Organize Your Workspace (Expert Picks)
You can organize your soldering workspace with ten expert picks that fit common sizes and tools. Start with the YIHUA S200 holder (six grooves for 32–7 AWG, brass wool cleaner) and the YIHUA D-2 iron holder (1.02″ opening). Use the Weller WLACCSCI hard case (12.2″ x 5.5″ x 2.4″) or Khanka/Milwaukee cases for M12 irons and batteries. Add a Tidy Tool Packout liner and a silicone mat with ruler. Follow compartment sizing and material tips to match your tools and components to learn more.
Key Takeaways
- Choose cases sized to fit your largest tools (e.g., 250 mm iron, 150 mm wire reels) and confirm compartment dimensions before buying.
- Use custom-molded EVA or foam inserts for secure, impact-resistant storage of irons, batteries, and accessories.
- Prefer holders with integrated tip cleaners (brass wool) and heat-resistant silicone trays for safer bench-top soldering.
- Pick portable options under ~3 lb with durable exteriors (ABS/EVA) and reliable zippers or latches for field use.
- Organize with removable dividers, mesh pockets, and spool mounts to keep tips, flux, wires, and bits accessible and tangle-free.
YIHUA S200 Silicone Soldering Wire Holder with Brass Wool Cleaner and 6-Groove Storage Tray
Sale
YIHUA S200 Blue Heat-Resistant Silicone Soldering Wire Holder with Brass Wool Cleaner, 6 Grooves...
- Safe Wire Soldering with Helping Hands: no need to hold wires and soldering iron at the same time; securely holds wires to prevent heat/burn injuries during wire...
- Heat-Resistant Helping Hands Soldering Wire Holder: withstands high temperatures; soft yet durable silicone resists bending and retains shape even after storage in tool...
- Built-In Brass Wool Tip Cleaner: this wire soldering holder's integrated tip cleaner cleans soldering tips quickly with less temperature loss; maintain the soldering iron...
You may be interested
If you do small electronics or RC repairs, the YIHUA S200 Silicone Wire Holder is a practical third-hand tool you can use to secure 32–7 AWG wires while soldering. You place wires in one of six grooves, each sized for specific diameters, and rest components in the integrated tray. You use the brass wool cleaner to wipe solder tips between joints, extending tip life. The silicone resists high heat and keeps shape after storage. For setup, align holder near your station, insert wires, solder, clean tip on brass wool, then store small parts in the tray. Warranty covers 12 months.
Best For: Hobbyists and technicians doing small electronics or RC repairs who need a compact third-hand to hold 32–7 AWG wires and keep soldering tips clean.
Pros:
- Heat-resistant silicone with six grooves secures a range of wire diameters (32–7 AWG) and keeps shape after storage.
- Integrated brass wool tip cleaner extends soldering tip life and allows quick cleaning between joints.
- Small tray stores components and waste, providing an all-in-one, portable soldering aid.
Cons:
- Limited to wires within 32–7 AWG—larger cables or bulkier connectors won’t fit securely.
- Not a full soldering iron stand; lacks additional heat sinks or tool-holding features found on larger stations.
- Silicone may attract grease/dirt over time and can be harder to deep-clean than hard surfaces.
Milwaukee Tool Bag
Milwaukee Tool Bag
- Milwaukee Tool Bag
- Milwaukee
- Case
Choose the Milwaukee Tool Bag (model MILM12BAG-S, UPC 701017972143) when you need a compact, water-resistant case for basic soldering gear that fits into larger tool systems. You can carry up to one compartment measuring 13L x 9W x 3H inches, weighing 9.9 ounces, in red and black fabric. You can place a soldering iron, spool, and small hand tools inside, then close the zipper to keep moisture out. You can slide this bag into a larger tool chest or pack. Check the 30-day Amazon return policy and the manufacturer warranty for coverage.
Best For: Compact tool users who need a water-resistant, lightweight case to carry basic soldering gear and small hand tools inside larger tool systems.
Pros:
- Lightweight and compact (13 x 9 x 3 in; 9.9 oz), easy to slide into larger tool chests or packs.
- Water-resistant fabric and zipper help protect tools and soldering supplies from moisture.
- Durable brand and high customer rating (4.6/5 from 2,641 reviews) indicate reliable quality.
Cons:
- Single compartment limits organization for multiple small parts or delicate components.
- Small size may not fit larger soldering stations or bulkier tools.
- No batteries included and limited information on interior padding for impact protection.
Weller Soldering Iron Storage Case, Hard Sided – WLACCSCI
Weller Soldering Iron Storage Case, Hard Sided - WLACCSCI
- Clean & Tidy Storage: Maintain a clean and organized soldering work environment by storing your soldering irons in the Weller Soldering Iron Storage Case
- Hard Shell Exterior: The case's hard shell exterior and soft interior lining protects your irons when not in use
- On-the-Go: Storage case zips closed for safe and secure transit
This hard-sided Weller storage case (model WLACCSCI) is for technicians and hobbyists who need a compact, protective way to carry a soldering iron. You can use this WLACCSCI case to keep one soldering iron secure and your workspace tidy. The hard shell exterior resists impacts, and the soft interior lining cushions the tip and handle. Measure your iron against the 12.2 x 5.5 x 2.4 inch package dimensions before purchase. Zip the case closed for safe transit. To store, place the cooled iron inside, align the cord, close the zipper, and carry it by hand or in a bag.
Best For: technicians and hobbyists who need a compact, protective case to store and transport a single soldering iron while keeping their workspace organized.
Pros:
- Hard shell exterior provides impact resistance for safe transport.
- Soft interior lining cushions the iron and tip to prevent scratches or damage.
- Compact, zip-closure design makes it easy to carry or fit inside a larger tool bag.
Cons:
- Sized for a single soldering iron only, so not suitable for multiple tools.
- Limited internal space may not fit larger or unusually shaped irons; check 12.2 x 5.5 x 2.4 inch dimensions.
- No built-in compartments for accessories like solder, tip cleaner, or spare tips.
Tidy Tool Custom Insert for Milwaukee M12 Soldering Iron and Packout Compact Organizer
TidyTool Insert for Milwaukee M12 Soldering Iron 2488-20 and Packout Compact Organizer...
- 🔥 PERFECT FIT FOR M12 SOLDERING IRON – Custom-molded liner designed exclusively for the Milwaukee M12 Soldering Iron (2488-20), ensuring a snug, secure fit.
- 🧰 COMPATIBLE WITH PACKOUT COMPACT ORGANIZER – Fits perfectly inside the Milwaukee Packout Compact Organizer (48-22-8435), keeping your soldering setup neat and...
- 💪 HEAVY-DUTY DURABILITY – Made from impact-resistant black plastic to protect your tool from damage, dust, and debris on the job or in storage.
A custom-molded liner (Tidy Tool) fits the Milwaukee M12 Soldering Iron model 2488-20 snugly and is made to sit inside the Milwaukee Packout Compact Organizer 48-22-8435, so you can carry a protected soldering setup and small accessories in a single compact case. Insert the liner into the Packout compartment until it seats flush with the bottom lip. Place the M12 iron into the molded cavity; the fit should prevent lateral movement. Store tips and a battery in adjacent cavities. Use the hidden compartment for a small GPS tracker. Note: liner only, tools and Packout not included.
Best For: Professionals and hobbyists who use the Milwaukee M12 soldering iron and want a compact, organized, and protective storage solution inside a Packout Compact Organizer.
Pros:
- Custom-molded fit secures the Milwaukee M12 soldering iron (2488-20) to prevent lateral movement.
- Impact-resistant black plastic construction protects the tool and accessories from damage, dust, and debris.
- Hidden compartment for a small GPS tracker adds security and peace of mind.
Cons:
- Listing includes only the liner; Milwaukee M12 iron, batteries, and Packout Compact Organizer are not included.
- Designed specifically for the M12 soldering iron and Packout Compact Organizer model 48-22-8435, so compatibility with other tools/cases is limited.
- Molded cavities may not accommodate non-standard accessories or larger batteries.
Khanka Storage Case for Milwaukee M12 Soldering Iron and M12 2488-20 Battery (Case Only)
khanka for Milwaukee M12 Soldering Iron Stroage Case, Compatible with Milwaukee Soldering Iron and...
- Rugged Protection for Harsh Work Environments: Crafted with a rugged EVA shell and shock-absorbing interior, this Milwaukee soldering iron case is engineered to withstand...
- Perfect Fit for Milwaukee M12 Soldering Iron: Designed exclusively for the milwaukee soldering iron and compatible with the Milwaukee soldering iron 2488-20, this case...
- Built for Professionals On the Move: Whether you’re doing on-site electrical repair, automotive rewiring, or construction site maintenance, this case makes it easy to...
If you need a durable, jobsite-ready case for the Milwaukee M12 soldering iron, the Khanka Storage Case fits the 2488-20 battery model and holds the 2488-20 tool securely. You can store the 2488-20 soldering iron in the custom-molded EVA interior that prevents shifting. Close the reinforced zipper to protect against dust, impact, and moisture. Use the velvet-lined slot for the iron and place spare tips, wires, and fuses in the built-in stretch mesh pocket. Grip the anti-slip handle to carry the case. Inspect the shock-absorbing interior before each job to guarantee long-lasting protection.
Best For: electricians, contractors, and tradespeople who need a durable, jobsite-ready case to safely store and transport the Milwaukee M12 2488-20 soldering iron and accessories.
Pros:
- Custom-molded EVA interior with velvet-lined slot prevents tool shifting and cushions against impact.
- Rugged, shock-absorbing shell and reinforced zipper protect against dust, moisture, and drops.
- Lightweight with an ergonomic anti-slip handle and built-in stretch mesh pocket for organized accessory storage.
Cons:
- Case only — does not include the Milwaukee M12 soldering iron or battery.
- Custom fit may not accommodate larger or differently shaped soldering irons or additional accessories.
- EVA shell limits expandability compared with soft bags or larger hard cases for more equipment.
Solder Dispenser Reel Stand with Solder Wire, Flux, Paste and Small Parts Storage Box
Solder Dispenser Reel Stand, Solder Wire,Flux,Paste and Small Parts Storage Box
- It can be used to store and organize solder wires,paste,flux and small hardware, and other components.
- Solder Dispenser Reel Stand allows you to easily use solder wire in welding projects
- Made of high-quality plastic, durable and long-lasting
For hobbyists and electronics technicians who need quick access to solder and small parts, the Solder Dispenser Reel Stand (model SDR-120P) gives you organized storage and fast feed access. You mount a 0.5 kg solder reel on the central spindle, then feed 0.8 mm wire through the guided nozzle. The SDR-120P measures 180 x 120 x 95 mm and weighs 250 g, made of durable ABS plastic. Use the four-compartment box for flux jar, paste syringe, and M2–M4 screws. You can place the stand at your bench edge, pull wire smoothly, cut to length, and close the lid after use.
Best For: hobbyists and electronics technicians who need quick, organized access to solder wire, flux, paste, and small hardware at their workbench.
Pros:
- Compact, space-efficient design with a four-compartment storage box for flux, paste, and M2–M4 screws.
- Smooth wire feed from a 0.5 kg reel through a guided nozzle (for 0.8 mm wire) for faster workflow.
- Durable ABS plastic construction and lightweight (250 g) for easy placement at bench edge.
Cons:
- Limited to 0.5 kg reels and 0.8 mm wire size, restricting compatibility with other reel sizes or wire diameters.
- Small overall dimensions (180 x 120 x 95 mm) may not accommodate larger tools or parts.
- Plastic construction, while durable, may be less robust than metal stands for heavy-duty use.
Weller Soldering Station Storage Case, Soft Sided – WLACCSCS
Sale
Weller Soldering Station Storage Case, Soft Sided - WLACCSCS
- Clean & Tidy Storage: Maintain a clean and organized soldering work environment by storing your soldering equipment or tools in the Weller Soldering Station Storage Case
- Package Dimensions: 9.9 H x 13 L x 8.3 W (inches)
- Package Weight: 1.9 pounds
Choose the Weller Soldering Station Storage Case, Soft Sided (model WLACCSCS) when you need compact, organized storage for a single soldering station and its tools. You can store a soldering iron, tips, spool, and small tools in the soft-sided compartment. The case measures 9.9 x 13 x 8.3 inches, so confirm your station fits before purchasing. It weighs 1.9 pounds and ships from China. To pack, place the station base flat, lay the iron alongside, insert tips in pockets, and secure cords. Close the zipper fully to protect contents. Use the model code WLACCSCS for ordering or reference.
Best For: Hobbyists and technicians who need a compact, soft-sided case to organize and transport a single soldering station and its accessories.
Pros:
- Compact dimensions (9.9 x 13 x 8.3 inches) fit a single station, iron, tips, spool, and small tools.
- Lightweight (1.9 pounds) and easy to carry.
- Soft-sided design with pockets and zipper closure for organized storage and quick packing.
Cons:
- Soft sides provide limited protection compared with hard cases.
- May not fit larger or non-standard soldering stations—measure first.
- Ships from China, which could mean longer delivery times for some buyers.
YIHUA D-2 Soldering Iron Holder with Brass Wool Tip Cleaner and Sponge
YIHUA D-2 Soldering Iron Holder, Heat-resistant Tip Cleaner with Brass Wool Tip Cleaner and Cleaning...
- Heat-Resistant: This full metallic soldering iron holder prevents accidental damage during soldering tasks
- Storage and Cleaning: Includes soldering iron stand for storage; brass wool soldering iron tip cleaner for effective tip cleaning without significant temperature loss...
- Stable and Durable: Soldering iron stand weighs 0.5 pound for improved stability while storing your soldering iron
The YIHUA D-2 Soldering Iron Holder is ideal when you need a stable, ready-to-use tip cleaner that saves time during repeated soldering tasks. You place your iron in the 1.02-inch opening for secure storage. The full metal body resists heat and weighs 0.5 pounds for stability on your bench. Use the brass wool tip cleaner to remove solder without cooling the tip, then wipe on the included sponge for final cleanup. Dimensions are 6.57 x 2.72 x 2.87 inches. You get 12-month US technical coverage and 24/7 Amazon support for setup or issues.
Best For: Hobbyists and technicians who need a stable, heat-resistant soldering iron holder with a ready-to-use brass-wool tip cleaner for frequent soldering tasks.
Pros:
- Full metal construction resists heat and provides a durable, stable stand (0.5 lb) for bench use.
- Brass wool tip cleaner removes solder without significantly cooling the tip, speeding repeated work.
- Includes sponge for final cleanup and backed by 12-month US technical coverage with 24/7 Amazon support.
Cons:
- Holder opening (1.02 in) may not fit unusually large or non-standard iron barrels.
- Metal construction can get hot to the touch during heavy use and may require caution.
- Relatively basic feature set—no additional tool holders or integrated fume protection.
YIHUA Heat-resistant Silicone Soldering Mat with Storage Slots and Built-in Ruler
YIHUA M150 Heat-resistant Soldering Mat with Multiple Storage Slots, Built-in Ruler, Bendable Soft...
- Heat-resistant: This soldering mat can withstand temperature up to 932℉; provides reliable workbench protection against heat and burns from hot solder or soldering iron...
- Dimensions: This work mat measures 12.99*8.23*0.12 inches (330*209*3mm) with its major working area of 10.12*6.77 inches (257*172mm); providing sufficient and organized...
- Multiple Functional Zones: Soldering mat features 5 square storage slots at the upper part including 1 slot for screwdriver; built-in ruler can measure up to 24cm, making...
If you need a compact, heat-safe workspace for delicate electronics, the YIHUA M150 fits that role with exact dimensions and built-in storage. The mat measures 12.99 x 8.23 x 0.12 inches, with a main working area of 10.12 x 6.77 inches. It resists heat up to 932℉ and is made of flexible silicone. Use the five upper square slots, one dedicated for a screwdriver, and three right-side slots to organize SMD parts and screws. The built-in 24 cm ruler lets you measure components directly. You get 12-month US technical coverage and 24/7 Amazon support.
Best For: Hobbyists and technicians needing a compact, heat-resistant, and organized workspace for soldering small electronics and SMD components.
Pros:
- Heat-resistant up to 932℉, protecting surfaces and tools during soldering.
- Flexible silicone construction with built-in 24 cm ruler and multiple storage slots for SMD parts, screws, and a screwdriver.
- Compact dimensions (12.99 x 8.23 in) with a dedicated main working area, plus 12-month US technical coverage and 24/7 Amazon support.
Cons:
- Main working area (10.12 x 6.77 in) may be too small for larger projects or multiple tools.
- Thin profile (0.12 in) offers limited cushioning compared with thicker mats.
- Limited number of storage slots may not accommodate larger or numerous components and tools.
Soldering Storage Box for Tools and Electronic Components
WAIMILK Soldering Storage Box Soldering Dispenser For Soldering Tools Small Parts and Organization...
- This box can help you organize messy welding workbenches and improve work efficiency
- This box combines the functions of organizing solder wires, organizing various pastes, small tools, screws, and chips
- This box is made of high-quality plastic raw materials, which are thick and durable
A compact storage box like WAIMILK’s Soldering Storage Box is ideal when you need organized space for solder wires, pastes, small tools, screws, and chips. You can place the 6.4D x 5.5W x 2.5H inch box on your bench to reduce clutter. The blue polypropylene case weighs 12.8 ounces and includes a stainless steel rod for spool mounting. Open the rectangular box, route solder through the rod, and store paste tubes and chips in separate compartments. Close the polished lid to keep dust out. Use Amazon’s 30-day return if needed and check additional warranty details.
Best For: Hobbyists and electronics technicians who need a compact, portable organizer for solder wire spools, paste tubes, small tools, screws, and component chips.
Pros:
- Compact, lightweight polypropylene case (6.4 x 5.5 x 2.5 in, 12.8 oz) that fits neatly on a workbench.
- Includes stainless steel rod for convenient solder spool mounting and tidy wire routing.
- Polished, dust-resistant lid and multiple compartments improve organization and work efficiency.
Cons:
- Limited internal space may not accommodate larger spools or bulky tools.
- Only includes the box and rod; solder, paste, and other accessories sold separately.
- Rectangular fixed layout may not suit users needing customizable compartment sizes.
Factors to Consider When Choosing Soldering Tool Storage
You can start by checking the storage’s heat resistance rating, such as a minimum of 200°C or product code HR-200, to protect hot soldering irons and spools. Next, verify organizational capacity with exact dimensions like 300 x 200 x 120 mm, labeled compartments, and removable trays to fit tips, flux jars, and 50 g solder reels. Finally, confirm portability and size, choose durable materials like ABS or powder-coated steel (grade S235), and ascertain compatibility with your tools by measuring handle diameters and tip lengths before purchase.
Heat Resistance Rating
When choosing storage for soldering irons and tips, make sure it has a heat resistance rating above 932°F (500°C) so it won’t melt or warp while cooling tools. You should select materials like high-temp silicone or engineered plastics rated for 500°C or higher, for example silicone mat model SM-500 or polymer case PTC-500X. Check product labels and datasheets for explicit heat resistance numbers before buying. Place hot irons in holders that allow 10–20 mm clearance and vertical airflow to disperse residual heat. After use, set the iron in the holder for at least 5 minutes or until tip temperature reads below 50°C with an IR thermometer (model IR-2A). These steps reduce burn risk and prevent tool degradation while storing soldering equipment.
Organizational Capacity
After checking heat ratings and cooling procedures, focus on how much storage you need and how it’s arranged. Count compartments: aim for 8–12 sections for a basic kit or 20+ for advanced setups. Measure tools: confirm internal dimensions fit a 250 mm iron, 150 mm wire reels, and 100 mm plier handles. Choose trays with designated slots for tips, screws, and bits, labeled or sized at 10–20 mm each. Inspect materials: use ABS or aluminum housings rated to 80–100°C and 2 mm wall thickness for impact resistance. Verify dividers are removable for customization. Step 1: list items. Step 2: measure largest piece. Step 3: match to compartment layout. You can then store everything without overcrowding or loss.
Portability and Size
Although portability often means a smaller case, choose dimensions that still fit your largest items and workspaces. Measure your soldering iron length, spool diameter, and accessory depth; common targets are 12″ x 8″ x 4″ (30.5 x 20.3 x 10.2 cm). Pick lightweight cases under 3 lbs (1.4 kg) for field work. Check handles and zippers: test for 20 lb (9 kg) lift capacity and smooth pull with one hand. Use organizers with dedicated pockets sized for 2.5 mm tips, 3″ flux bottles, and 60W irons. Prefer water- and dust-resistant ratings like IP54 for travel protection. When packing, place heavy items low, secure loose parts in pouches, and zip fully before carrying.
Material Durability
Durability matters because jobsite knocks, heat, and moisture shorten a case’s useful life, so you should pick materials that match your work conditions. Choose high-quality plastics like ABS or polypropylene (PP) for light, impact-resistant shells. Consider an EVA shell (typically 3–6 mm thick) for added shock absorption. Look for water-resistant coatings or TPU laminates rated IPX4 or higher to reduce moisture intrusion. Inside, use soft linings such as 2–3 mm microfiber or foam with 30–50 Shore A hardness to prevent scratches. Inspect seams and zippers; opt for #5 or #10 coil zippers with reinforced stitching. For field checks, drop a loaded case from 1 m and inspect tools for movement. Replace the case if foam compression exceeds 20% or lining tears appear.
Compatibility With Tools
Anyone choosing a soldering-tool case should confirm fit and layout before buying, since mismatched storage can scratch tips or stress cords. You should measure tool length and diameter: record iron length (e.g., 150 mm) and handle diameter (e.g., 18 mm). Compare those to compartment dimensions or molded liner specs, like 160 x 20 mm slots. Check model compatibility lists and product codes (e.g., Case A-210, Model S-45). Use adjustable foam or Velcro dividers for mixed tool kits; cut foam in 5 mm increments and test fit. Include space for tips (store in 10 x 5 mm slots) and spool wire (20 mm diameter). Verify cord routing channels and closure type before purchase to prevent movement in transit.
Safety and Protection
Start with a case that has a hard shell and a shock-absorbing interior, such as Model H-320 with a 5 mm EVA foam liner, to protect tools from bumps and drops during transit. You should choose heat-resistant materials rated to at least 200°C for compartments that contact hot irons. Place each iron in its own 25 mm diameter sleeve or holder to avoid contact. Use soft interior linings to prevent scratches on tips and sensors; verify lining thickness of 2–5 mm. Organize components with labeled slots and dividers, keeping wire spools isolated from sharp objects. Favor ergonomic handles and balanced weight under 4.5 kg to ease lifting. Inspect seals and latches before each job, and secure loose parts with Velcro straps or foam inserts for safe transport.
Frequently Asked Questions
Are Any of These Storage Options Flame-Retardant or Fireproof?
No, most common options aren’t fully fireproof; you can choose flame-retardant models labeled UL 94 V-0 or ASTM E84. Look for product codes like 3M FR-701 or Pelican 1490NF. Measure: pick containers ≥300 x 200 x 120 mm for soldering irons and cords. Step 1: verify manufacturer datasheet for temperature rating. Step 2: add 6 mm silica or ceramic pads. Step 3: store away from open flames.
Can These Cases Safely Store Lithium Batteries Long-Term?
Like a vault for coins, you can store lithium cells cautiously. You can’t assume typical cases are safe long-term unless they’re certified. Look for UN 38.3, UL 1642, or IEC 62133 labels. Use fireproof boxes like Pelican 1495 with foam inserts, or Plan-B Batteries Safe Case P/N PB-CASE-01 (290×190×120 mm). Charge to 40%–60%, remove metal contacts, and inspect monthly for swelling or leaks.
Do Any Organizers Include Anti-Static (ESD) Protection?
Yes, some organizers include ESD protection. You can buy ESD tool rolls like Hakko A1568 (420 x 300 mm) that use conductive PVC fabric. Use ESD foam blocks, 50 x 25 x 12 mm, with grounding tab PN 123-ESD. For boxes, get Plano 1364-01 with ESD liners or Pelican 1200-ESD case. Store batteries isolated in ESD bags, seal with anti-static tape, and ground the workstation with a 1 MΩ wrist strap.
Which Options Are Best for Travel Airline Carry-On Rules?
You can use TSA-compliant organizers sized under 22 x 14 x 9 cm (8.7 x 5.5 x 3.5 in). Choose hard-shell cases like Pelican 1010 (internal 185 x 127 x 62 mm). Pack batteries separately in carry-on, 2 spare lithium cells per device, each under 100 Wh. Use anti-static foam inserts, ESD bag code MIL-PRF-81705. Close tools, cap tips, and declare any batteries at checkpoint per airline rules.
Are Replacement Parts or Inserts Available for These Products?
Yes, you can get replacement parts and inserts for many models. Check product codes like STS-120 foam tray, HLD-45 clip set, and PKG-9 dividers. Measure cavity dimensions: 210 x 120 x 30 mm for foam trays, 50 x 12 mm for clips. Order from manufacturer or authorized dealers, provide serial number. To replace, remove old insert, clean cavity, fit new part, secure with supplied screws or adhesive per included instructions.
