As an Amazon Associate, we earn from qualifying purchases. Some links on this site are affiliate links at no extra cost to you. Our recommendations are based on thorough research and editorial judgment.
Utility Extension Items and Energy Efficiency
This guide lists utility extension items and efficiency measures like SH-1.5GPM-202 showerheads and FA-1.0G-101 aerators. Install low-flow fixtures to 1.5 GPM, shut off hot water, use Teflon tape, then test. Replace bulbs with A19-9W-2700K LEDs, use DIM-LED2 dimmers, add smart controls and motion sensors indoors. Install ST-TH1 smart thermostat, confirm C-wire, label wires, restore power, expect up to 15% savings. Use 12 AWG cords, upgrade attic insulation to R-38, apply UEP-2026 rebate; further sections explain.
Key Takeaways
- Use heavy-duty 12 AWG outdoor extension cords for safe, low-loss power to high-draw utility equipment.
- Install smart power strips (SP-PS100/SP-PS200) to eliminate standby energy and cut phantom loads automatically.
- Upgrade to LED bulbs (A19-9W-2700K) and LED-compatible dimmers to reduce lighting energy by up to 90%.
- Integrate smart thermostats (ST-TH1) with HVAC and labeled wiring to optimize schedules and lower heating/cooling use ~15%.
- Combine energy audits, rebates (UEP-2026), and ENERGY STAR appliances to prioritize upgrades and maximize efficiency savings.
Low-Flow Water Fixtures and Smart Plumbing
You may be interested
When reducing household water heating energy, low-flow fixtures like 1.5 GPM showerheads or 1.0 GPM faucet aerators cut water use 30–50%. The guide recommends installing SH-1.5GPM-202 showerhead and FA-1.0G-101 aerator water fixtures for flow rates. Step 1: shut off hot water supply at the valve and test flow with a 1 L container. Step 2: remove old fixtures with adjustable wrench and install low-flow units using Teflon tape. Step 3: turn supply on, measure time to fill 1 L to confirm GPM. Smart plumbing modules can monitor water flow and alert for leaks via Wi‑Fi. These upgrades conserve water, lower utility costs tied to heating water, and improve a home’s overall energy efficiency and sustainability efforts. Estimated annual savings reach $200 per family annually. For outdoor projects, choose heavy-duty 12 AWG extension cords for high-draw electric mowers and long runs.
Premium solid brass construction
Premium Solid Brass Construction
Premium solid brass construction
LED Lighting and Smart Controls
Because LED bulbs use up to 90% less energy than incandescent bulbs, replacing lighting can cut household electricity quickly. LED lighting using 9W A19 E26 bulbs (model A19-9W-2700K) produces 800 lm and lasts 25,000 hours. A technician installs three bulbs per room, spacing 2.4 m apart for even light. Smart controls include smart LED bulbs and smart switches (model SS-WS1) that connect via Wi‑Fi or Zigbee. Settings enable schedules to automate lighting and motion sensors to turn lights off after 5 minutes of vacancy. These steps optimize fixtures to achieve up to 15% energy savings and reduce electricity costs. Routine checks of wattage and firmware are advised to maintain energy-efficient consumption and overall energy performance. Replace dimmers with LED-compatible models (model DIM-LED2) annually for reliability. Many tan gaffer tapes use rubber-based adhesives that provide strong adhesion and clean removal, performing well between 50 to 200 degrees Fahrenheit.
[MODERN CERAMIC DESIGN]: Elegant long-neck ceramic silhouette with a smooth finish and gold-tone accents adds contemporary sophistication to bedrooms, living rooms, offices, and entryways
【Dimmable Adaptable Arc Floor Lamps】Our dimmable arch floor lamp, integrated with a remote control for effortless stepless adjustment of brightness (0%-100%) and color temperature (2700K-6000K). With the included remote control, you can conveniently switch between 4 unique lighting modes (reading, feeding, working, and night light) to cater to your diverse lighting requirements. This versatile arc floor lamp is the perfect reading or office lamp, and an excellent addition to any living room
Control With Alexa : Smart bulbs that work with alexa & google assistant, turn the light bulbs on/off, set up schedules. 16 Million brilliant and soft colors plus tunable whites to create the good mood; Great for parties and everyday use(only 2.4GHz)
Smart Thermostats and HVAC Integration
Although often simple to install, a smart thermostat such as model ST-TH1 requires basic electrical checks and a compatible C-wire. Installers should verify 24 VAC output, measure 20–30 mA current draw, and confirm terminal labeling on HVAC systems. Smart thermostats learn routines to optimize heating schedules, can reduce annual energy usage by up to 15%. Units offer remote control via smartphone apps and energy usage reports to improve energy efficiency and energy-saving. Integration steps include shutting power at breaker, labeling five wires, connecting R, C, W, Y, G, and restoring power. Utility companies often provide rebates for qualified models, check rebate codes and eligibility. When coupled with high-efficiency HVAC systems, these devices enhance home comfort and lower bills. Installation manuals specify torque 4 Nm. For outdoor power considerations, ensure any extension cords used are SJTW jacket rated or IP65 waterproof to protect against water and abrasion.
3 ZONE MINI SPLIT AC/HEATING SYSTEM: Tailored for multiple rooms, our 36000 BTU mini split ac/heating system boasts individual air handlers for each room and a singular outdoor unit. Experience unparalleled individual temperature regulation for supreme comfort in every space.
Cooper & Hunter 15,000 BTU Packaged Terminal Air Conditioner (PTAC) with 3.5 kW Electric Heater, charged with R-32 refrigerant. Enjoy reliable year-round cooling and heating in both residential/commercial uses such as hotel rooms, apartments, homes, or dorms.
Named the ‘Best Value’ smart thermostat of 2018 by USA Today’s Reviewed
Power Management and Smart Power Strips
Several smart power strips, such as model SP-PS100 or SP-PS200, can cut standby energy waste and save households up to $200 annually. The SP-PS100 provides three switched outlets and two USB ports, measuring 12.0 inches by 2.0 inches, for compact placement. Install by plugging into a grounded 120 V outlet, connect devices, and set the SP-PS200 schedule using its onboard buttons to automate power cycles. These smart power strips detect phantom energy draw and cut power to idle equipment within 30 seconds. Remote control via Wi‑Fi app lets users reduce energy and monitor electrical consumption in real time. Adoption will improve energy management, enhance safety by shutting heat sources, and increase overall energy efficiency. Installation takes less than ten minutes and requires no tools. They often incorporate smart charging features to optimize charging efficiency across devices.
Eve Energy Strip requires iPhone or iPad with the latest version of iOS/iPadOS.
Control From Anywhere: Turn electronics on and off from anywhere with your smartphone using the Monster app, whether you are at home, in the office or on vacation. Outlets are independently controlled. High speed USB ports are non-smart.
𝐏𝐨𝐰𝐞𝐫 𝐔𝐩 𝐭𝐨 𝟗 𝐃𝐞𝐯𝐢𝐜𝐞𝐬 𝐚𝐭 𝐎𝐧𝐜𝐞 - Connects and surge protects 6 individually controlled smart AC outlets and 3 always-on USB ports (5V 2.4A) for simultaneous, smart power across home or office setups.
Attic Insulation and Air Sealing
After addressing standby losses with smart power strips, owners should inspect attic insulation and air sealing to reduce building envelope losses. Inspect attic insulation levels, aiming for R-38 to R-60 in cold climates or R-30 to R-49 in milder zones. Use 12–16 inches of fiberglass batts (product code FG-BATT-16) or 10–14 inches of blown cellulose (CL-BLOW-10). For air sealing, seal gaps greater than 1/4 inch with low-expansion spray foam (SF-102) and gaps under 1/4 inch with acrylic caulk (CA-01). Recommend a professional energy audit to measure leaks with a blower door test and infrared scan. After insulation improvements and air sealing, expected energy savings and energy efficiency gains approach 15% on heating and cooling costs. Reduced utility bills extend HVAC system life and improve home comfort annually. For maintaining materials used during installation, remember to Store rolls flat and keep them away from heat to preserve adhesive quality.
Efficient Appliances and ENERGY STAR Products
Many homeowners can reduce energy use by replacing major appliances with ENERGY STAR certified models, such as refrigerators, washers, and dryers. ENERGY STAR certified appliances meet Environmental Protection Agency guidelines, offering Energy Efficiency and saving energy that can reduce electricity use by up to 50 percent. Step 1: select an ENERGY STAR model, note model code (example: RF28R7551SR). Step 2: check rebate eligibility and apply with utility extension program forms. Step 3: schedule professional installation, verify appliance location, measure 36 in. clearance for refrigerators and 27 in. doorway access. Expected energy savings equal roughly $450 annually, producing long-term energy savings. These energy-efficient upgrades improve appliances and electronics performance and lower greenhouse gas emissions. Many units qualify for rebates and tax credits, increasing cost-effectiveness greatly. Ensure cords and hoses meet safety standards such as UL/ETL-listed and proper gauge selection to prevent overheating.
Night Curtain Included. Pull down the night curtain at the end of each day to conserve energy overnight.
Fully guaranteed maintenance service: Stainless Steel interior and exterior, exterior stainless steel designed with anti-fingerprint function, easy for daily cleaning, 6-year warranty on compressor, 2-year warranty on all parts, and labor and manual door-to-door service. We have professional customer service personnel and engineers to answer your questions online. Welcome to contact us by phone or email（Warranty service applies both in commercial address and residential address ）
Extra-Spacious Interior — A massive 30 cu. ft. capacity gives you room to store bulk groceries, large platters, and everything in between.
Solar-Ready Wiring and EV Charger Provisioning
Homebuilders and remodelers can preinstall solar-ready wiring consisting of 10/2 THHN conduit runs and a 60-amp dedicated subpanel connection to simplify future solar installations. Install 10/2 THHN in 3/4″ conduit from roof soffit to main panel. Mount a 60A subpanel model SI-60 within 10 ft of main panel. Label circuits “PV” and run a 2″ conduit stub to roof ridge. For EV charger provisioning, run 6/3 NM-B or 6 AWG THHN to a 240V/60A receptacle location. You can reserve a 60A breaker space in the main panel for future electric vehicle charging stations. These energy-efficient upgrades support renewable energy and home energy efficiency, reduce electricity costs, minimize installation costs, enhance property resale value, and qualify for local and federal incentives. Follow local code requirements. Additionally, verify that the 10/2 THHN conductors are rated for the intended environmental conditions to prevent future issues.
Roof and Window Upgrades for Thermal Performance
A durable roof and properly sealed windows reduce heat transfer and can save homeowners $300–$500 per year after replacement. Inspect roofing every 5 years, replace shingles older than 20 years with reflective clay or sheet metal panels (e.g., ASTM A653 grade 33). Install double-paned ENERGY STAR certified windows, model NFRC U-factor ≤0.30, to improve insulation. Step 1: measure openings to nearest 1/8 inch. Step 2: remove trim, set window, shim to level, secure at 6-inch intervals. Step 3: apply foam sealant and 3/8-inch backer rod, finish with silicone caulk. Add attic insulation to R-38 where climate requires. These measures lower cooling costs, raise thermal performance, and produce measurable annual energy savings that help homeowners save money. Documentation of receipts supports rebate and tax-credit claims. Consider portable power stations with LiFePO4 batteries for improved safety and longevity.
Home Energy Audits and Utility Coordination
Several homeowners can reduce energy waste by scheduling a professional home energy audit that uses specific tests and documented steps. These home energy audits are performed by a certified energy auditor using blower door, duct leakage, and infrared scans. Inspect insulation quality for energy efficiency in attic and walls, measure R-values R-38 attic and R-13 wall, record results on Form 1. The report lists prioritized energy-saving upgrades, with step-by-step actions, estimated savings, and expected energy costs reduction percentages annually. Utility coordination includes checking local rebates, enrollment in free audit programs, submitting rebate code UEP-2026, tracking application deadlines and documentation. You can schedule follow-up, re-test building envelope, and expect energy usage to drop fifteen to thirty percent after energy-efficient upgrades within twelve months post-audit. Choose UPS systems with appropriate capacity (VA/W) to ensure continuous protection for critical equipment.
Frequently Asked Questions
What Qualifies for Energy-Efficient Home Improvement Credit?
Qualified improvements include energy saving windows, insulation upgrades, efficient appliances, solar panel installation, programmable thermostats, smart home technology, energy audits, energy efficient lighting, HVAC system improvements, and documentation for utility rebates and tax credit eligibility.
Is There a Device That Can Reduce Your Electric Bill?
Yes, a variety of devices can reduce electric bills: smart thermostats, energy monitoring systems, LED lighting, power strips, solar panels, appliance upgrades, insulation improvements, energy audits, demand response and home automation enhance efficiency and savings.
What Items Are Considered Energy-Efficient?
Coincidentally, one household already owned many: Energy efficient appliances, LED lighting, Smart thermostats, High efficiency windows, Solar panels, Programmable timers, Insulation upgrades, Efficient HVAC systems, Energy saving tips, and Energy audits which reduced monthly bills.
What Does a Higher EEF Mean?
A higher EEF means energy savings and improved efficiency ratings, lowering utility bills through eco friendly upgrades like home insulation and smart thermostats, supporting sustainable living with renewable resources, reducing carbon footprint and cost savings.
